I know it's paint. However, I don't know what thinner does to bare
aluminum after the clearcoat dissolves. I'd hate to totally mung it up
because I used the wrong stuff to remove the clearcoat.
Mike Lowe
> ----- Original Message -----
> From: "Brian Berryhill" <bikepoet@netzero.net>
> To: "Mike Lowe" <mikelowe93@houston.rr.com>
> Sent: Monday, June 24, 2002 11:57 PM
> Subject: Re: Paint on Keizer Wheels
>
>
> > I'm not sure, but isn't clearcoat like a paint? You could buy some
paint
> > stripper and it might take the clearcoat off.
> >
> > Brian
> >
> >
> > ----- Original Message -----
> > From: "Mike Lowe" <mikelowe93@houston.rr.com>
> > To: <autox@autox.team.net>
> > Sent: Monday, June 24, 2002 11:45 PM
> > Subject: Paint on Keizer Wheels
> >
> >
> > > I was thinking of painting my Keizers to make them somewhat
unique.
> > It
> > > looks like they have a clearcoat on them. What prep will I need to do
> > > before painting them? Do I take my dremel to the clearcoat and rough
it
> > up?
> > > Do I take thinner to it and obliterate it? I just got a new set of
> > Hoosiers
> > > so this is an ideal time to take things apart for painting.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Partial archives at http://www.team.net/archive
|