Jarrid Gross wrote:
> Chuck,
>
> I beleive the mech pump pressure specs are in the manual, I wouldnt
> go beyond 1.5 psi. If you have the specs for the elec pump, it will
> tell what the max pressure will be (no flow).
>
> I put a 3.5 PSI regulated pump on with a freshly rebuilt set
> of CD150s, and had them overflow the bowls at idle.
> The problem has to do with the pressure on the seat and the
> lack of leverage that the bowl level/float has on shutting
> off the fuel flow.
Darn I used to have a flow control and gauge ....Guess it will be back
to a new one.. with a gauge to set the pressure. ..But 1.5 pds isn't
much though is it. I do have a brand spankin new pump.. it is for
4.0-5.5 #s. The other parts need are a oil pressure switch,, Hmmmmmn
Thanks sir.
chuck
|