alpines
[Top] [All Lists]

"Hillman - " Top frame update

To: <buddshillman@msn.com>
Subject: "Hillman - " Top frame update
From: "jon" <humbersnipe@home.com>
Date: Mon, 3 Sep 2001 22:02:04 -0700
This message forwarded by the Hillman List.

Well, I found a parts update that I'd forgotten I had -  and I just bought
it at the Invasion!

It seems the top frame changed significantly for the Series III. Both Series
I and II had the same frame, but with the Series III, they changed the
header as well as the latch mechanism that locks the frame upright.  This
puts a bit of a crimp in things.

I thought I might be able to use the Ser III header, and just change the
locating plates that guide the header into the windshield frame. No such
luck - all the hardware specs are different according to the parts book.
They went from  #6  machine screws to #10 machine screws, so a fair amount
of butchery would be required to try it that way.

It looks like I'll have to try to find a Ser I or II top frame, or at least
the header rail and passenger's side rail from one.

Keep an eye out, folks, thanks!

Jon Arzt
Omaha, NE  USA

====================================================================
Please address all replies to messages from the Hillman List to:

     hillman@can-inc.com

This will assure that all members of this list will benefit from the
information in your reply.

<Prev in Thread] Current Thread [Next in Thread>