--===============7346586139346802297==
--000000000000a85deb05c330f057
Sloane,
I had the same issue on a TR4 on the seal at the back of the transmission,
complete with scratches. I put in another seal with some Hylomar, and that
fixed it. It helped that that seal is only $1.65 from TRF.
Tom
'69 TR6
'63 TR4
On Tue, May 25, 2021 at 5:13 PM Richard <taylorturbo6@yahoo.com> wrote:
> Slone --- If the scratch doesn't run the full length of where the seal lip
> would reside, you may be able to place a new seal deeper or shallower in
> the bore where there's no scratch.
> If Speedi-Sleeve comes in that bore diameter that's another option.
> If the scratch is too long and not too deep, polishing it out with a
> cylinder hone is another option.
> OR you could chance it as is using a good sealer.
>
> Dick
>
> On May 25, 2021, at 4:33 PM, im sloane <im_sloane@hotmail.com> wrote:
>
> Hey guys,
> On the TR6, doing a Diff freshen-up. Replacing the seals. Got the ones
> from Moss. Put oil in it last night, and today I see it's leaking from the
> pinion seal.
>
> The center area the seal presses into is a little scratched up, result
> from removing the old seal. I'm assuming that's the issue. However, TRF
> sells much more expensive seals.
>
> SO, do I try another Moss seal, try to smooth out that surface, and maybe
> even a thin coat of the gasket maker? Or is the TRF seal worth it?
>
> any advice?
>
> Sloane
> 69-Six
> 72-Spit
>
> _______________________________________________
> Support Team.Net <http://team.net> http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/taylorturbo6@yahoo.com
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/tom.lofgren@stanfordalumni.org
>
>
--000000000000a85deb05c330f057
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">Sloane,<div><br></div><div>I had the same issue on a TR4 o=
n the seal at the back of the transmission, complete with scratches. I put =
in another seal with some Hylomar, and that fixed it. It helped that that s=
eal is only $1.65 from TRF.</div><div><br></div><div>Tom</div><div>'69 =
TR6</div><div>'63 TR4</div></div><br><div class=3D"gmail_quote"><div di=
r=3D"ltr" class=3D"gmail_attr">On Tue, May 25, 2021 at 5:13 PM Richard <=
<a href=3D"mailto:taylorturbo6@yahoo.com";>taylorturbo6@yahoo.com</a>> wr=
ote:<br></div><blockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px=
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir=3D=
"auto"><div></div><div>Slone --- If the scratch doesn't run the full le=
ngth of where the seal lip would reside, you may be able to place a new sea=
l deeper or shallower in the bore where there's no scratch.=C2=A0</div>=
<div>If Speedi-Sleeve comes in that bore diameter that's another option=
.=C2=A0</div><div>If the scratch is too long and not too deep, polishing it=
out with a cylinder hone is another option.=C2=A0</div><div>OR you could c=
hance it as is using a good sealer.=C2=A0</div><div><br></div><div>Dick=C2=
=A0</div><div><br>On May 25, 2021, at 4:33 PM, im sloane <<a href=3D"mai=
lto:im_sloane@hotmail.com" target=3D"_blank">im_sloane@hotmail.com</a>> =
wrote:<br><br></div><blockquote type=3D"cite"><div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
Hey guys,=C2=A0</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
On the TR6, doing a Diff freshen-up. Replacing the seals. Got the ones from=
Moss. Put oil in it last night, and today I see it's leaking from the =
pinion seal.=C2=A0</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
<br>
</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
The center area the seal presses into is a little scratched up, result from=
removing the old seal. I'm assuming that's the issue. However, TRF=
sells much more expensive seals.=C2=A0=C2=A0</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
<br>
</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
SO, do I try another Moss seal, try to smooth out that surface, and maybe e=
ven a thin coat of the gasket maker? Or is the TRF seal worth it?</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
<br>
</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
any advice?=C2=A0</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
<br>
</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
Sloane=C2=A0</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
69-Six</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
72-Spit</div>
</div></blockquote><blockquote type=3D"cite"><div><span>___________________=
____________________________</span><br><span>Support <a href=3D"http://team=
.net" target=3D"_blank">Team.Net</a> <a href=3D"http://www.team.net/donate.=
html" target=3D"_blank">http://www.team.net/donate.html</a></span><br><span=
>Suggested annual donation =C2=A0$12.96</span><br><span>Archive: <a href=3D=
"http://www.team.net/archive"; target=3D"_blank">http://www.team.net/archive=
</a></span><br><span></span><br><span></span><br><span><a href=3D"mailto:6p=
ack@autox.team.net" target=3D"_blank">6pack@autox.team.net</a></span><br><s=
pan><a href=3D"http://autox.team.net/mailman/listinfo/6pack"; target=3D"_bla=
nk">http://autox.team.net/mailman/listinfo/6pack</a></span><br><span></span=
><br><span>Unsubscribe/Manage: <a href=3D"http://autox.team.net/mailman/opt=
ions/6pack/taylorturbo6@yahoo.com" target=3D"_blank">http://autox.team.net/=
mailman/options/6pack/taylorturbo6@yahoo.com</a></span><br><span></span><br=
></div></blockquote></div>_______________________________________________<b=
r>
rer" target=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" target=
=3D"_blank">http://www.team.net/archive</a><br>
<br>
<br>
<a href=3D"mailto:6pack@autox.team.net"; target=3D"_blank">6pack@autox.team.=
net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/6pack"; rel=3D"noreferrer"=
target=3D"_blank">http://autox.team.net/mailman/listinfo/6pack</a><br>
<br>
tom.lofgren@stanfordalumni.org" rel=3D"noreferrer" target=3D"_blank">http:/=
/autox.team.net/mailman/options/6pack/tom.lofgren@stanfordalumni.org</a><br=
>
<br>
</blockquote></div>
--000000000000a85deb05c330f057--
--===============7346586139346802297==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
--===============7346586139346802297==--
|