Hi John,
On my 74.5, the other small one on the top should go to the plastic gas tank
vent line and the small one on the ARO valve goes to a small nipple on the
intake manifold.
Jeff
---- John North via 6pack <6pack@autox.team.net> wrote:
> Not sure this is worth it but I am trying to get this functional.
> There are three tubes on top of the canister and one on the bottom.
> There are two tube connections on the anti-run on valve, a large one
> and a small one.
>
> The TRF catalogue here
>
> http://trf.zeni.net/TR6bluebook/49.php
>
> shows hoses connected to two of the canister top ones (middle one to
> the valve cover, small one to the carbs) and the large one on the
> canister bottom, connected to the large one on the valve. So that
> leaves a small one on the canister and a small one on the valve. Are
> these connected to something or are they plugged?
>
> I have Masters Electrical Manual and he discusses the wiring, but not
> the functional side...
>
> John North
> 1976 Inca Yellow
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/fetnerj001@hawaii.rr.com
>
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
|