I could not get rid of the stumble right off idle. New plugs, reset the
valve lash, new dizzy cap, rotor, plug leads, points. Timing was spot on,
mixture seemed to be a little lean so I richened up the mixture a bit--could
not get rid of it. Changed the air filter elements--problem vanished.
----- Original Message -----
From: "Dave More" <tr6@lbcs.ca>
To: <6pack@autox.team.net>
Sent: Saturday, April 23, 2011 12:46 PM
Subject: [6pack] SU HS6 on TR6 Needles & Springs
>I have some HS6's on my car and the car runs well with them with the
>exception
> of a bit of a minor stumble off idle. Mixture is correct, the carbs are
> balanced, dashpot oil is the correct level, so I'm starting to think
> springs
> and/or needles.
>
> Can any of you running these carbs tell me which springs and needles
> you're
> running?
>
> I got these carbs from Jeff at Paltech so I'll be getting hold of him as
> well.
>
> Oh, and FWIW I'm also at about 4000' altitude.
> _______________________________________________
>
> 6pack@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/wcwellbaum@cox.net
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|