I didn't have any signs (or recognize any) until I saw fluid on the carpet
under the steering column. The servo was leaking and dripping inside the
cabin. I sent it back east, Indiana maybe. I'm at work and don't have the name
or address of the place I sent it. I'm sure someone else will have the info
for you. If not, I'll send it later when I get home. A lot of folks from the
6pack forums have sent theirs there.
Dennis
'72 TR6
----- Original Message -----
From: "Bill Wellbaum" <wcwellbaum@cox.net>
To: "6pack" <6pack@autox.team.net>
Sent: Thursday, December 9, 2010 6:02:20 AM
Subject: [6pack] TR-6 Brake Servo Question
My Brake Servo is starting to make some sort of clicking noise when the brake
pedal is depressed and released. B Does this mean it is on its way out? B What
are the typical signs that the servo needs rebuilt/replaced? B Can I get a
recommendation on who to send it off to for a rebuild? B Apple Hydraulics?
(Yes, this has been covered numerous times before--but I didn't save the
information)
Second question: B I just replaced the master cylinder with a new unit from
Moss. B I now find a little puddle of brake fluid on top of the reservoir cap
after a drive. B I've taken to putting a small paper towel "diaper" tied to
the
cap until I find a remedy. B When I pump the brake pedal I notice the fluid
"spurts" against the reservoir cap. B What would cause this?
Bill Wellbaum
British Auto Club of Las Vegas
baclv.org
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/6pack/dc714@comcast.net
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|