Run a tap down the threads...should cut the paint
Todd
Sent from my iPhone
On Aug 26, 2010, at 10:58 AM, Timothy Holbrook <tjh173@yahoo.com> wrote:
> Guys - my brother has a GT6 and recently had his floors replaced. Body
shop
> used POR on the floors, which is great stuff as we all know - BUT...some
POR
> seems to have made its way to the captive nuts for the seat mounts,
seatbelt
> mounts, etc, and he's having a tough time getting the bolts to thread.
He's
> understandably worried about stripping the threads.
>
>
> Thoughts on how best
> to resolve this? Just go slowly and lube the threads as he
> goes? Or is
> there something he can use to try to clean the POR off the threads
> beforehand?
>
> Tim Holbrook
> 1971 TR6
> _______________________________________________
>
> 6pack@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/6pack/red_tr250@yahoo.com
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|