> I put return springs on the later carbs also so to
> make the solid cable work easier.
I had this setup for a while, but eventually the springs overcome the friction
holding the choke in position. Then I could no longer set the choke - the
springs would return the choke to off. So I removed the springs and now all is
well. The solid cables do a good job of both pushing and pulling, just like
the solid cables in areas like your heat/vent flaps, etc.
- Lee
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|