Mike
If you have a copy of Dan Masters wiring book and the extra pages for
his optional panel, you will see a plastic spade fuse block. These can be had
at Autozone or some of the parts stores for about $ 4.00 each. They snap
together if you want 4 - 8 - 12 fuses. This way, even using the same area, you
can break out (separte) some of the wiring to a separte fuse. Horn, Hazards,
Lights, can be on a separte fuse.
It is castled so the orginal wires can be
attached and jumpers added if necessary.
Dale
________________________________
From: michael lunsford
<mblunsfordsr@yahoo.com>
To: 6pack@autox.team.net
Sent: Sun, October 4, 2009
2:35:44 PM
Subject: [6pack] Fuse Box
I would like to convert my old fuse box
to a more modern one that uses the
small (not mini-though I would consider
that too) spade fuses. Anyone have
any recommendations that aren't too
obtrusive that will hopefully fit in the
same area as the stock one?
Mike
Lunsford
_______________________________________________
Support Team.Net
http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You
are subscribed as tpdwinch@yahoo.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|