If you have triples, I've seen where someone had take two air cleaners and
sectioned them so they would fit the triple set-up.
Al
----- Original Message -----
From: "James Henningsen" <trguy@cfl.rr.com>
To: "'Dave from Calgary'" <YYCTR6@shaw.ca>; <6pack@autox.team.net>
Sent: Wednesday, June 24, 2009 5:31 PM
Subject: Re: [6pack] Cold air intake
> Dave:
> Thanks for the idea and a great setup for the twin carb. The source for
> the
> duct flange is a big help.
> Jim Henningsen
>
> -----Original Message-----
> From: Dave from Calgary [mailto:YYCTR6@shaw.ca]
> Sent: Tuesday, June 23, 2009 8:55 PM
> To: 'James Henningsen'; 6pack@autox.team.net
> Subject: RE: [6pack] Cold air intake
>
> To quote the PO of my car who did the very same thing:
>
> "The simple solution that I did was to buy the twin-snout air cleaner
> housing
> from an early ('69 - '70) TR6 and run 2 paper hoses (the ones that are
> sold
> for
> carb preheat) to the rad shroud just above and to the left of the carbon
> canister. I bought a couple of aluminum duct flanges from
> http://www.aircraftspruce.com/catalog/appages/ductflanges.php and rivited
> them
> to the shroud where I slipped the hoses on. Seems to work great with the
> stock
> carb setup. "
>
> And here's the result: http://lbcs.ca/images/P1080787_1024x768.jpg
>
>
> -----Original Message-----
> From: 6pack-bounces@autox.team.net [mailto:6pack-bounces@autox.team.net]
> On
> Behalf Of James Henningsen
> Sent: June-23-09 6:38 PM
> To: 6pack@autox.team.net
> Subject: [6pack] Cold air intake
>
> Anyone have a source for an inexpensive cold air intake setup for an
> aluminum shroud radiator duct. I know Richard Good has a nice setup, but
> I
> am looking for the economical "racer" look. I am thinking of some sort of
> tubing connector mounted to the shroud that the flexible tubing could
> clamp
> to and then have the tube end right in front of the front carb and have a
> clamp/adapter to secure. Anyone have some pics and a parts source they
> are
> willing to share. Many thanks,
>
> Jim Henningsen
>
> 75 TR6 (triple ZS)
>
> Maitland, FL
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|
