-------------- Original message --------------
From: Ian Breyer <ianbreyer@yahoo.com>
> Hi all. I am hoping you guys can provide some insight.
>
> I just had my tachometer rebuilt by Nissonger Instruments. They did a real
>nice
> job and it is working much better than before. There is no longer any bounce
>and
> it isn't hanging up and jumping all over the place. My only question is that
>it
> use to register 3,000 RPMs in 4th gear when I was doing 70 MPH. Now it is
>about
> 3,600 in 4th gear at that speed. Of course I have always had my doubts about
>the
> accuracy of the speedo as well. I am running 205/70/15 tires. The
>transmission
> and rear end are stock. No overdrive. Is this normal?
When new, my TR6 showed 3500 rpm at 70 mph, no overdrive. Your 205/70x15 tires
are very close in diameter to stock tires, so your reading is likely more
accurate now than before.
Irv Korey
74 TR6 CF22767U now on 215/60x15 tires
Highland Park, IL
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|