Bob,
What kind of glue would I use? Epoxy?
Thanks,
Peter
lang@isis.mit.edu writes:
Hi,
TRF sells all the plugs for the TR6 block. The front and side ones come in
"sticks", you insert the stick (with GLUE) and cut it off and with the
front one you grind flush with the block and with the side on you cut it
standing proud of the block and then peen it over (presumably so it seals
better - I've never seen an explaination of "why".) All the other ones are
pipe thread (except the rear-most plug in the main gallery which is a
machine thread and the plug seals to the block.
Perhaps your plug was not installed with some sort of glue/sealant and/or
peened over properly?
regards,
rml
**************Psssst...Have you heard the news? There's a new fashion blog,
plus the latest fall trends and hair styles at StyleList.com.
(http://www.stylelist.com/trends?ncid=aolsty00050000000014)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|