6pack
[Top] [All Lists]

Re: [6pack] su carbs

To: <rccpl1@yahoo.com>, <6pack@autox.team.net>
Subject: Re: [6pack] su carbs
From: "Wayne Lee" <wayne@motorcarriage.com>
Date: Fri, 25 Jul 2008 18:30:48 -0400
Hi TY,
      Most setups run either the BAG as supplied by Moss in their 
conversions. This is for the spring retained needle. I'm running BAE needles 
which are just about the same but the BAG's  are a little leaner on the 
lower Rev range, and also a spring needle. I pulled the flange off of mine 
and ran them in non biased pistons. Joe Curto could set You up with the 
proper equivalent. I'm running a 75 with standard C/R, non EGR manifold with 
Ansa Exhaust, and the HS6's with K&N Filters. I average 23mpg on my rural 
route commute with a non Overdrive Box.
Cheers,
Wayne Lee
Douglas, MA


----- Original Message ----- 
From: "john doe" <rccpl1@yahoo.com>
To: <6pack@autox.team.net>
Sent: Friday, July 25, 2008 5:21 PM
Subject: [6pack] su carbs


> hi all still need help with this su conversion for a tr6 does anyone know 
> what size needle is used the one i have is stamped bc anyone with the 
> conversion know what their using ty
> _______________________________________________
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>