Hi Bob,
If I recall correctly, the whole tab that the brake light switch is mounted on
can be bent slightly with your bare hands, this quickly solves the problem with
little fuss.
Kendall
San Clemente, CA
----- Original Message ----
From: Sally or Dick Taylor <tr6taylor@webtv.net>
To: Bob Danielson <75TR6@tr6.danielsonfamily.org>
Cc: Triumphs <triumphs@autox.team.net>; 6pack@autox.team.net
Sent: Monday, May 12, 2008 11:26:41 PM
Subject: Re: [6pack] Brake Light Switch
Bob---Since your brake light switch works as designed (when you pull the
pedal back) you can probably adjust the one you have. Note that there
are two adjusting nuts that control the depth of the switch relative to
the pedal.. Just move the switch away from the pedal a tad.
Dick
E-mail message
From: 75TR6@tr6.danielsonfamily.org(Bob Danielson
I just noticed that my brake lights don't turn off......unless I pull
the pedal back that last 1/8" with my foot. When I stick my head in the
foot well, press & release the pedal, I can feel that it wants to come
back that last smidge which is what turns the lights off. The spring is
good. The only thing different is a rebuilt servo. Does this indicate a
bad or failing switch? I remember a thread on here last year about a
better quality replacement switch. I think it was from a Honda. Does
anyone have the info on that?
Thanks
Bob
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as mailkendall@sbcglobal.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|