Bob,
I agree with the suggestion that your problem is probably related to a
bad ground, I soldered a pigtail to the ground side of each of the
light receptacles on each side of my rear lights. I then crimped an O
type connector on the other end and attached it to the stud that holds
the light on. The problem I had was that the parking lights worked
fine but when I hit the brakes nothing worked. I guess this problem
is probably due to corrosion, the fading of the chrome finish that
conducts the ground from each receptacle to the body and the mysteries
of Lucas Electric. Wonder why they never thought to add that extra
ground wire to this stuff like everyone else did?
Mike Lunsford
_________________________________________________________________
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try
it now.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|