6pack
[Top] [All Lists]

Re: [6pack] L.E.D. Replacement 1157 bulbs

To: forzion@maine.rr.com, 6pack@autox.team.net
Subject: Re: [6pack] L.E.D. Replacement 1157 bulbs
From: TR6UO@aol.com
Date: Fri, 2 May 2008 12:27:37 EDT
HD Lighting version:

    Standard Base / Single Contact Bulb -  White  1156 Style Direct
Replacement  LED Bulb
Related Products:  _Standard  Base / Single Contact Bulb - Amber -
#HD1156YSD_ (http://heavy-dutylighting.com/product_detail.php?uuid=a2E8EB9E0E)
_Standard  Base / Two Contact Bulb - Amber - #HD1157YSD_
(http://heavy-dutylighting.com/product_detail.php?uuid=aFB26DAAD0)   _Standard
Base / Two Contact Bulb -
Red - #HD1157RSD_
(http://heavy-dutylighting.com/product_detail.php?uuid=aA0F950DB4)   _Wedge
Base / Single Contact Bulb - Amber - #HD3156YSD_
(http://heavy-dutylighting.com/product_detail.php?uuid=a27B28BAD5)   _Wedge
Base / Single
Contact Bulb - White - #HD3156WSD_
(http://heavy-dutylighting.com/product_detail.php?uuid=aAADE9C099)   _Wedge
Base / Two Contact Bulb - Amber -
#HD3157YSD_ (http://heavy-dutylighting.com/product_detail.php?uuid=a308B41EC7)
_Wedge
 Base / Two Contact Bulb - Red - #HD3157RSD_
(http://heavy-dutylighting.com/product_detail.php?uuid=aB25D287E1)   _Wedge
Base / Two Contact Bulb - White -
#HD3157WSD_
(http://heavy-dutylighting.com/product_detail.php?uuid=aF117A5579)   Technical
Specifications:  LED's - 13 Super Duty  Square Diodes
Width - 0.93"
Height - 2.0"
Voltage Range -  7.5 - 14VDC  Additional  Features:  For aftermarket use. May
not comply with  SAE or U.S. DOT standards. Perfect replacement for most*
incandescent  vehicle lighting. Fit standard vehicle sockets. Super bright
3600
light  dispersion design.
*Resistor Statement:
Since LED bulbs draw much  less current then standard incandescent bulbs some
vehicle computers may  think a bulb is out. If installing LED bulbs in your
car, truck or  motorcycle causes your blinkers to blink fast or causes other
electrical  problems, it may be necessary to install a load resistor to
correct
these  problems.
*Thermal Flasher:
LED brake/tail lamps may not work with  some older thermal flasher units. An
LED brake/tail lamp will require an  electronic flasher/blinker unit which is
commonly available at your local  auto parts store.




**************Wondering what's for Dinner Tonight? Get new twists on family
favorites at AOL Food.
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>