On Thu, 1 May 2008, Jeff Scarbrough wrote:
> At 07:12 PM 5/1/2008, alan g graffam wrote:
>
>> Does anyone have advise on how to do this job and not get too frustrated?
>
> In general:
>
> !. Soak everything in PB Blaster or equivalent...
>
> 2. Let it soak for a while, then apply more.
Good advice.
Also - an impact gun is great for busting things loose, but sometimes it
just busts things, so you need to be ready to replace the studs and nuts.
I usually buy all the fasteners for the job up front. That way I'm
"prepared". Seems to work.
[stuff deleted]
> studs. When reassembling, copper anti-seize is your friend.
AMEN!
regards,
rml
---------------------------------------------------------------------------
Bob Lang NER/SCCA | This space for rent
Solo Chair 2008 TR6 40 F Prepared | Triumph!
Voice:781-438-2568 FAX: 617-258-9535 | Cell: 339-927-4489
---------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|