Stan,
The other thing you can do is to pop the glass out of the right bullet and go
to a salvage yard and get a pass side mirror glass from a newer car (the ones
that have the objects may appear closer warning). Then take both to a glass
shop and have them cut the new glass to the same size and put it in. That
should work as well.
Lou
-----Original Message-----
From: "Foster, Stan" <stan.foster@hp.com>
Date: Sun, 20 Jan 2008 01:58:38
To:"lfm614@aol.com" <lfm614@aol.com>,
"6pack-bounces+lfm614=aol.com@autox.team.net"<6pack-bounces+lfm614=aol.com@autox.team.net>,
TR-6 list<6pack@autox.team.net>
Subject: Re: [6pack] TR6 door mirrors
Thanks Lou. I'm actually using a stick on mirror to enhance the passenger side
bullet as you can see in this picture. It was the closest fit that I could
find (not quite 4 inches diameter) and although it works quite well I would
prefer something that looked better and didn't require this degree of
improvisation to function..
http://i38.photobucket.com/albums/e119/foster461/NET%20Fall%20Back%20Tour%202
007/DSC_0082.jpg
Stan
-----Original Message-----
From: lfm614@aol.com [mailto:lfm614@aol.com]
Sent: Saturday, January 19, 2008 8:39 PM
To: Foster, Stan; 6pack-bounces+lfm614=aol.com@autox.team.net; TR-6 list
Subject: Re: [6pack] TR6 door mirrors
Stan,
I have bullet mirrors on both sides and had trouble getting the pass side
aligned so I could see so I went to Walmart and got one of the 3 3/4" stick on
concave mirror and it works like a charm. Now I have a panoramic view on the
pass side.
Lou
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as lfm614@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|