List:
Personally, I use a gasket scraper from NAPA that is about 3/4" wide both to
pry back the disk and door panel and pop the clips holding the panel in
place. When the door panel is pushed in, I use a small Phillips or an ice
pick to push out the pin. Then I look fast to see where the sound of the
pin hitting the floor is coming from.
Andy
-----Original Message-----
From: 6pack-bounces+apackard68=comcast.net@autox.team.net
[mailto:6pack-bounces+apackard68=comcast.net@autox.team.net] On Behalf Of
Bob Danielson
Sent: Saturday, January 12, 2008 5:51 PM
To: 'robert fabie'; 6pack@autox.team.net
Subject: Re: [6pack] window crank removal tool
Bob,
There's a good picture of the pin you have to remove here
http://tr6.danielsonfamily.org/WindowChannel.htm As someone mentioned it
comes out with a thin punch/drift. My pictures show the re-installing
process.
Bob
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org
-----Original Message-----
From: 6pack-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net
[mailto:6pack-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net] On
Behalf Of robert fabie
Sent: Saturday, January 12, 2008 4:36 PM
To: 6pack@autox.team.net
Subject: [6pack] window crank removal tool
Can someone recommend the best tool for removal of the window crank and
inside door handle? Will a "conventional" window crank removal tool work,
i.e., one that is designed for a GM product, work?
Thanks
Bob Fabie
'75 TR6
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as 75tr6@tr6.danielsonfamily.org
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.516 / Virus Database: 269.19.1/1220 - Release Date: 1/11/2008
6:09 PM
Checked by AVG.
Version: 7.5.516 / Virus Database: 269.19.1/1220 - Release Date: 1/11/2008
6:09 PM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|