6pack
[Top] [All Lists]

Re: [6pack] compression

To: Alan Salvatore <6parts@charter.net>, 6pack <6pack@autox.team.net>
Subject: Re: [6pack] compression
From: Greg Perry <rgperry@earthlink.net>
Date: Sat, 5 Jan 2008 09:42:46 -0600 (GMT-06:00)
Al,

I found a solution that worked for me over the years of trying to stop the 
front timing cover seal and oil pan oil leaks on my TR6.  The oil was even 
coming out of the dip stick tube before I figured out the cause of the problem. 
 The solution was to clean the gauze/ filter material in the valve cover for 
the crankcase ventilation system.  The vent was restricted causing the 
crankcase pressure to build up pushing the oil out of the crankcase. To check 
for restriction just blow through the vent tube with the oil filler cap off.  
There should be no restriction at all. If you feel any restriction clean the 
filter material!  I now only have two 1 inch oil spots on the cardboard that 
are caused by the rear main seal and the rear oil gallery plug leaking.  The 
oil consumption dropped considerably.  It is worth a try.
Regards,
Greg Perry

-----Original Message-----
>I've been having a problem for awhile in that the car has been using a quart 
>of oil with every other tank of gas.
>Thanks
>
>Al
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>