Thanks Randall, I might as well try as they are useless as is. Is the
iridium tip as good a conductor as copper? John
Randall wrote:
>> Would this be because of
>> the gap, or is copper a better material for non high energy
>> ignition systems and the iridium just makes them last longer?
>>
>
> John, you didn't say what you're trying to fire them with. IMO .030" is too
> wide for the stock ignition system.
>
> Oddly enough, NGK's web site doesn't mention not to regap them, only to not
> change the gap more than .008". In any case, I think the main danger is
> that of damaging the (relatively fragile) center electrode; so careful
> bending of the side electrode should be OK.
>
> Randall
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> http://www.team.net/donate.html
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
|