I would add : be sure the antenna is extended in case it drops into the
fender well, you'll be able to pull it out. Much harder if its not.
BTDT
Al Salvatore
www.triumphowners.com/624
----- Original Message -----
From: "Mitch Seff" <ms6453@optonline.net>
To: "Cary Henry" <caryhenry@hotmail.com>
Cc: <6pack@autox.team.net>
Sent: Thursday, April 06, 2006 7:34 AM
Subject: Re: Couple More Questions
> It's all done from above the fender. Generally after loosening the nut
> at the base you can then lower the antenna down about a inch or two
> allowing the see saw like retainer to flip vertically . This should let
> you pull the unit out. Make sure you disconnect the cable first , this
> is usually in the footwell.
>
> --
> Mitch Seff
> Oceanside, N.Y.
> 75 TR6 SC
> http://www.triumphowners.com/384
|