Hello Al,
I built a puller a few years ago for TR6 rear hubs. There are pictures and
"the rest of the story" toward the bottom of this web page:
http://topshamautoparts.com/tr6/fall2002.htm
Hard to believe just how much force it takes to separate some of these hubs!
Rick Patton
http://topshamautoparts.com/tr6/
> -----Original Message-----
> From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net]On
> Behalf Of Alan Salvatore
> Sent: Tuesday, December 13, 2005 6:49 PM
> To: 6pack; triumphs@autox.team.net
> Subject: Rear Hub Puller - Churchhill Copy
>
>
> A year or two ago I purchased a rear hub puller that was made by
> someone who
> had copied the churchhill tool.
> I have seen the church hill tool at TRF.
> I had brought mine to a machine shop to see if they could take
> apart a hub.
> He used an air wrench on it and could not get the hub to release.
> I thought at TRF they used a very large socket wrench or torque wrench.
> Is anyone familar with this copy, and what have they used to put enough
> pressure on it, to get it to work.
>
> thanks
>
> al salvatore
|