Thanks for the encouragement Vance. I already ordered from TRF, so have
nothing to lose by seeing if honing cleans it up. I rebuilt one about 10
years ago and it started leaking after about a month. The DPO used some
non-Girling fluid and all seals were soft, even the tipping valve seal.
Jeff
----- Original Message -----
From: "Navarrette, Vance" <vance.navarrette@intel.com>
To: "Jeffrey B. Fetner" <FETNERJ001@hawaii.rr.com>; <6pack@autox.team.net>
Sent: Saturday, September 27, 2003 11:37 PM
Subject: RE: Brake MC Part?
Jeff:
If the pitting is slight, you can hone the MC with a
brake cylinder hone. It will work just fine...
Vance
|