6pack
[Top] [All Lists]

RE: TR6 Aluminum hubs?

To: "'Chuck Arnold'" <Chuck.Arnold@oracle.com>,
Subject: RE: TR6 Aluminum hubs?
From: "Mike Munson" <fasttrs@mindspring.com>
Date: Wed, 26 Feb 2003 12:58:46 -0500
Do you want the ones for the Jaguar rotors? I may be able to have some
made up. 
I also have brackets for rear disc brakes.

Mike Munson

-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On
Behalf Of Chuck Arnold
Sent: Wednesday, February 26, 2003 11:41 AM
To: Joe Curry
Cc: Bill Bartlett; 6pack; FOT@autox.team.net
Subject: TR6 Aluminum hubs? 

Does anyone have a source for aluminum front hubs for the TR6?
Thanks,
Chuck

Joe Curry wrote:

> Bill Bartlett wrote:
> >
> > I just checked with Dave Bean and they said that they can install
the 7/16 - 20 either 1" long or protruding 2.3 ". So it looks like the
7/16 is ok I just need to figure on which stud length.
> > Bill B
>
> For racing, you'd be better off going with the long ones.  1 inch will
> barely cover the lugnut and most sanctioning bodies have a
specification
> that requires 3 or 4 threads (or more) exposed through the nut!
>
> JOe

[demime 0.99d.1 removed an attachment of type text/x-vcard which had a
name of Chuck.Arnold.vcf]

<Prev in Thread] Current Thread [Next in Thread>