Re: 220 hp TR6 engine

["Kai M. Radicke" <kai@radiohead.net>]

> actually, does anyone know off the top of their head the stock
> bore and stroke on the TR6?

Stroke: 95mm
Bore: 74.7mm

(off the top of my head, so you'll have to double check me)

I wouldn't go stroking a TR6 if that is an idea for anyone on the list.  The
rod angularity to the crankshaft at 90 degrees is already horrendous as
stock, you'll do nothing but increase the rate of wear on your bores and rod
bearings if you try to stroke the TR6 further.

Kai