On Sat, 13 Apr 2002 SJANNY@aol.com wrote:
> To All,
>
> I have installed a rebuilt engine in my 1974 TR6. I fitted a header with the
> engine out of the car. With the engine secured in place the outlet of the
> header is leaning up against the frame.
let me guess - a Monza header, perhaps?
> Is there any way to adjust the space between the header and the Frame? Can I
> adjust the engine mounts?
On my Monza headered car, I wound up spending about 10 hours
"re-fabricating" everything to get it to fit properly. I had to grind off
the collector (carefully) and then re-attach it and re-weld (carefully) to
get it to line up.
> Thanks,
>
> Steve
> 1974 TR6
> 1975 Spitfire
good luck.
rml
------------------------------------------------------------------------------
Bob Lang Room N42-140Q | This space for rent
Consultant MIT unix-vms-help |
Voice:617-253-7438 FAX: 617-258-9535 |
------------------------------------------------------------------------------
|