Walt,
The Plinth in my '72 Project was the color of the interior. Although it
has been a few years since I actually have laid eyes on it, if I recall
correctly, it was covered in a fabric (almost a velour texture).
As to the "tyre" plate on the glovebox door, in the '72, it is "affixed"
with adhesive. The position is such that it can be read when the door is
open, and placed centrally on the door, slightly closer to the "box" lock
- and slightly away from the hinge side of the door.
HTH
Mark Riddle
'72 TR6 Looooooooonnnnnggg project
On Thu, 14 Feb 2002 23:29:35 +0000 "Walter Fogle" <lbc4me@hotmail.com>
writes:
> Hello 6Pack:
>
> I just received some of my winter project part purchases. Can
> someone tell
> me what color the plinth (or mounting base) of the TR6 tunnel
> mounted
> interior light should be? Just black, or interior color matched?
>
> Also, I have a new glove box specifications plate that, I think,
> should be
> affixed to the back of the glove box door. Is this plate secured
> with small
> screws in the corners? (It's not pre-drilled) Or is it glued in
> place?
> What is the positioning?
>
> Thanks for your assistance.
>
> Walt Fogle
> '69 TR6, CC30689L
> Woodinville, WA
>
> _________________________________________________________________
|