- 1. [TR] side curtain build (score: 1)
- Author: Gary Nafziger <nafzigerg@yahoo.com>
- Date: Fri, 18 Jan 2013 19:12:53 -0800 (PST)
- I'm rebuilding my tr-3 side curtains and things are going well. However I'm having a problem fitting the forward solid window. It's very thin plexiglass and the only information I've been able to fin
- /html/triumphs/2013-01/msg00211.html (8,489 bytes)
- 2. Re: [TR] side curtain build (score: 1)
- Author: George Richardson <gpr@key-men.com>
- Date: Sat, 19 Jan 2013 06:33:31 -0500
- I used a big old Singer industrial sewing machine on the plastic and it just punched through. However, I did do some touchup on the ends by using a sewing awl and heating the needle so that it melted
- /html/triumphs/2013-01/msg00212.html (9,964 bytes)
- 3. Re: [TR] side curtain build (score: 1)
- Author: "Kinderlehrer" <kinderlehrer@comcast.net>
- Date: Sat, 19 Jan 2013 11:22:43 -0800
- My approach was bit different - I used the router attachment on my Dremel to cut a slot in the plastic, leaving sufficient material at the top and bottom. I then used a sewing awl to sew through the
- /html/triumphs/2013-01/msg00213.html (10,072 bytes)
- 4. Re: [TR] side curtain build (score: 1)
- Author: "Wbeech" <wbeech@flash.net>
- Date: Mon, 21 Jan 2013 10:31:23 -0600
- Speaking of side curtains, here is an auction for some aftermarket side screens on eBay. I have a set of these that came with my car, but never figured out just how to properly install them, or if th
- /html/triumphs/2013-01/msg00238.html (11,305 bytes)
- 5. Re: [TR] side curtain build (score: 1)
- Author: "Joseph Laurito" <trglory@verizon.net>
- Date: Mon, 21 Jan 2013 15:38:41 -0500
- Yeah, I have a set of those on my car. They work great. The soft lower part slides into a channel at the bottom of the aluminum frame. You need to put lift-a-dot fasteners along to bottom of that low
- /html/triumphs/2013-01/msg00249.html (13,163 bytes)
- 6. Re: [TR] side curtain build (score: 1)
- Author: "Andrew Uprichard" <auprichard@uprichard.net>
- Date: Mon, 21 Jan 2013 17:24:07 -0500
- Bill: these are AMCO sidescreens - came out for a limited time and are quite valuable (I see the set sold for $400 on eBay). My car had the problem of the weight of "traditional" sidescreens causing
- /html/triumphs/2013-01/msg00255.html (12,788 bytes)
This search system is powered by
Namazu