- 1. [Shop-talk] wobble in brakes (score: 1)
- Author: "John Niolon" <jniolon@att.net>
- Date: Fri, 26 Dec 2014 13:12:06 -0600
- 2008 Suburban.... noticed lately that when I apply brakes I feel a vibration or pulse like one of the rotors might be warped. Rotated tires this week and used a dial indicator to check for run out. T
- /html/shop-talk/2014-12/msg00041.html (8,993 bytes)
- 2. Re: [Shop-talk] wobble in brakes (score: 1)
- Author: "Eric J Russell" <ejrussell@mebtel.net>
- Date: Fri, 26 Dec 2014 15:29:30 -0500
- Try re-rotating the tires? Check that the lugs are tightened evenly? Eric Russell Mebane, NC -- Original Message -- _______________________________________________ Shop-talk@autox.team.net Archive: h
- /html/shop-talk/2014-12/msg00042.html (9,590 bytes)
- 3. Re: [Shop-talk] wobble in brakes (score: 1)
- Author: "John Niolon" <jniolon@att.net>
- Date: Fri, 26 Dec 2014 14:37:28 -0600
- Eric... the vibration was there BEFORE and after the rotate... all lugs torqued to 140# -- Original Message -- From: "Eric J Russell" <ejrussell@mebtel.net> To: "John Niolon" <jniolon@att.net>; "shop
- /html/shop-talk/2014-12/msg00043.html (10,218 bytes)
- 4. Re: [Shop-talk] wobble in brakes (score: 1)
- Author: "John Niolon" <jniolon@att.net>
- Date: Fri, 26 Dec 2014 15:11:20 -0600
- brakes were done (front and rear) less than one year ago (less than 15K on them) and rotors not turned... pads show plenty of material... -- Original Message -- From: Dwade Reinsch To: John Niolon ;
- /html/shop-talk/2014-12/msg00044.html (11,611 bytes)
- 5. Re: [Shop-talk] wobble in brakes (score: 1)
- Author: Dwade Reinsch <dreinsch@swbell.net>
- Date: Fri, 26 Dec 2014 13:30:40 -0800
- the wobble will be only in the rotors. Amount of material on pads has nothing to do with wobble. Several years ago I stopped trying to have them turned when I was doing a brake job and just always bo
- /html/shop-talk/2014-12/msg00045.html (12,767 bytes)
- 6. Re: [Shop-talk] wobble in brakes (score: 1)
- Author: John Miller <jem@milleredp.com>
- Date: Fri, 26 Dec 2014 14:37:14 -0800
- If it were an E39 BMW I'd say your lower control arm inner bushings were shot (forward arm in the 6cyl cars, rear arm in the 8cyl cars). Classic behavior in that vehicle. 2008 Suburbans I don't know,
- /html/shop-talk/2014-12/msg00046.html (9,152 bytes)
- 7. Re: [Shop-talk] wobble in brakes (score: 1)
- Author: "Karl Vacek" <KVacek@Ameritech.net>
- Date: Fri, 26 Dec 2014 20:40:49 -0600
- Another possibility is pad material building up unevenly on rotors. A set of EBC Green Stuff pads on a Mustang years ago drove me crazy. They'd pulse and wobble, then later be fine. Turns out I wasn'
- /html/shop-talk/2014-12/msg00047.html (9,125 bytes)
- 8. Re: [Shop-talk] wobble in brakes (score: 1)
- Author: "Randall" <TR3driver@ca.rr.com>
- Date: Fri, 26 Dec 2014 20:47:34 -0800
- .005" is huge, if the other side doesn't match it (in other words, thickness variation). Typical maximum spec is under .001". However, if the thickness is constant, then .005" shouldn't cause too mu
- /html/shop-talk/2014-12/msg00048.html (8,975 bytes)
This search system is powered by
Namazu