- 21. Re: [Shop-talk] Tapping off a crimp connector? (score: 1)
- Author: Michael Porter <mdporter@dfn.com>
- Date: Sun, 29 Dec 2013 13:22:55 -0700
- When I worked at the big bus company, we had large customers that put crimped soldered connections in their specs, and there was no way to avoid soldering. Now, on balance, soldering is more likely t
- /html/shop-talk/2013-12/msg00098.html (12,743 bytes)
- 22. Re: [Shop-talk] Tapping off a crimp connector? (score: 1)
- Author: "ElanS4" <ElanS4@cox.net>
- Date: Sun, 29 Dec 2013 23:31:19 -0500
- "if" - crimps have minimal or no air gaps at all. leading to a solid mass Exactly correct. is another question. For has been worth every rather than $3 or $30 though. Ignore the cheap tools - the cr
- /html/shop-talk/2013-12/msg00099.html (11,749 bytes)
- 23. Re: [Shop-talk] Tapping off a crimp connector? (score: 1)
- Author: "Randall" <TR3driver@ca.rr.com>
- Date: Sun, 29 Dec 2013 21:08:18 -0800
- BTW, the referenced web site had a photo of a perfectly crimped connector, with obvious air gaps between the wire strands. It doesn't always work. I also seriously doubt that it is possible to get t
- /html/shop-talk/2013-12/msg00100.html (10,248 bytes)
- 24. Re: [Shop-talk] Tapping off a crimp connector? (score: 1)
- Author: "ElanS4" <ElanS4@cox.net>
- Date: Mon, 30 Dec 2013 13:16:20 -0500
- with obvious air Obviously the crimp was too large, but that still doesn't mean that you don't have a solid mechanical and electrical connection. Heck, one of my projects for today is to replace the
- /html/shop-talk/2013-12/msg00101.html (12,269 bytes)
- 25. Re: [Shop-talk] Tapping off a crimp connector? (score: 1)
- Author: "Randall" <TR3driver@ca.rr.com>
- Date: Mon, 30 Dec 2013 12:43:20 -0800
- Ok, you win. The method that I've seen fail in a matter of months IS better than the one that has never failed in 30 years. Randall _______________________________________________ Shop-talk@autox.te
- /html/shop-talk/2013-12/msg00102.html (9,435 bytes)
This search system is powered by
Namazu