Bob, you didn't do anything wrong in the application of your label, believe it or not, most all of them had wrinkles in them from the factory, I know mine did, and I replaced it when I restored the c
Strangely I have only two rivet holes on the top inside fender on the drivers'side(LHD). I bought the car in 1986 and it was like that. I always assumed it was some sort of metal nameplate that went
I think that on the 1972 and earlier models the emissions data was on a plate pop-rivited to the front LH inner fender. As a side note, on my 1970 TR6, when I was stripping it down, I looked for my
If you want the air bubbles out...Get yourself a sewing needle and puncture a tiny hole and you will get the bubblesout. As far as the creases go...I don't think there is a remedy for that. Good luc
My '69 has the commission plate over the left fender. It has the commission number color and trim codes on that plate. The emissions sticker is on the left underside of the hood (or is it bonnet). Th
I assume that the sticker is affixed with acrylic adhesive. To move any object stuck with acr adhesive, try heating gently with a hairdryer (no, don't peel the paint off); Try moving the sticker and
There's no way to do it, BTDT. If you notice, the original decals had semi-circles perforated through out the decal and the replacements don't. A flat piece of material can't lay flat on a curved su