Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Wiring\s+an\s+ammeter\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Wiring\s+an\s+ammeter\s*$/: 7 ]

Total 7 documents matching your query.

1. Wiring an ammeter (score: 1): Author: JeffreyLos@aol.com; Date: Mon, 10 Jul 2000 03:19:47 EDT; Hello List: I could use some advice here. I'm wiring an ammeter into my 72 Spit, and since electrical is definitely not my strongpoint, I want to run it by the list just to make sure. The generic ins; /html/spitfires/2000-07/msg00315.html (7,889 bytes)
2. Re: Wiring an ammeter (score: 1): Author: Richard B Gosling <Gosling_Richard_B@perkins.com>; Date: 11 Jul 2000 04:20:38 -0500; I'm not a total electrical guru, but since no-one else has answered your post I thought I'd pass on my thoughts. The instructions sound reasonable to me. I'm not sure what is meant by a #10 wire - m; /html/spitfires/2000-07/msg00388.html (9,613 bytes)
3. Re: Wiring an ammeter (score: 1): Author: Flinthoof Ponypal <Flinters@picarefy.com>; Date: Tue, 11 Jul 2000 07:57:54 -0700; Most autmotive and heavy current ammeters have a shunting bar that connects the two terminals. It might have a slight resistance in it that the ammeter will register the needle with. At least that's; /html/spitfires/2000-07/msg00396.html (8,455 bytes)
4. RE: Wiring an ammeter (score: 1): Author: "Simmons, Reid W" <reid.w.simmons@intel.com>; Date: Tue, 11 Jul 2000 09:09:54 -0700; example house wiring uses #14 AWG for 15 Amp service, or #12 AWG for 20 AMP service (at 120 VAC). House wiring uses solid copper wire. I STRONGLY recommend STRANDED wire for automotive use. Reid '79; /html/spitfires/2000-07/msg00405.html (10,157 bytes)
5. RE: Wiring an ammeter (score: 1): Author: "Simmons, Reid W" <reid.w.simmons@intel.com>; Date: Tue, 11 Jul 2000 09:48:13 -0700; Well said Dan. A strong emphasis should be placed on "use rosin core solder only!". NEVER, EVER, use acid core solder for any electrical connections. And if you don't know how to solder (and most peo; /html/spitfires/2000-07/msg00408.html (9,266 bytes)
6. RE: Wiring an ammeter (score: 1): Author: Craig Smith <CraigS@iewc.com>; Date: Tue, 11 Jul 2000 12:13:39 -0500; Please take a look at this http://www.iewc.com/automotivecontents.htm It should answer most of your questions. Also http://www.iewc.com/Tech10b.htm Good Luck, If you have any specific questions give; /html/spitfires/2000-07/msg00411.html (10,545 bytes)
7. RE: Wiring an ammeter (score: 1): Author: gschluge@cstone.net (Greg Schluge); Date: Tue, 11 Jul 2000 22:27:04 -0400; You need ammeter basics, An ammeter is nothing but a voltage sensing device that has an internal or external SHUNT or resistor. There is usually a fusible link hooked into the plus lead of the batter; /html/spitfires/2000-07/msg00430.html (8,787 bytes)

Current List: 1 - 7
Page: [1]