- 1. Tr3 Turn signal/Horn attaching screws (score: 1)
- Author: Doug Mathews <mathews@uga.edu>
- Date: Sun, 27 Nov 2005 12:58:00 -0500
- There are 3 little pointed set screws in the steering wheel that retain the horn/turn signal in the steering wheel. No manual I look at even shows these screws. I'm replacing the defunct unit in my
- /html/triumphs/2005-11/msg00678.html (7,643 bytes)
- 2. Re: Tr3 Turn signal/Horn attaching screws (score: 1)
- Author: "Ed Woods" <fogbro1@comcast.net>
- Date: Sun, 27 Nov 2005 13:33:53 -0500
- My guess is that the originals have a 2BA thread, but 10-32 is so close that I've always used a 'Merican 10-32 setscrew for this application. Randall?? Ed == This list supported in part by The Vinta
- /html/triumphs/2005-11/msg00679.html (7,095 bytes)
- 3. RE: Tr3 Turn signal/Horn attaching screws (score: 1)
- Author: "John Herrera" <jrherrera90@hotmail.com>
- Date: Sun, 27 Nov 2005 16:44:57 -0500
- Moss has 'em for $1.25 each. P/N 323-315. John H. == This list supported in part by The Vintage Triumph Register == http://www.vtr.org
- /html/triumphs/2005-11/msg00684.html (7,718 bytes)
- 4. RE: Tr3 Turn signal/Horn attaching screws (score: 1)
- Author: "Randall" <tr3driver@comcast.net>
- Date: Sun, 27 Nov 2005 21:32:45 -0800
- TRF also has them, P/N 59107, $.95. Listed (but not pictured) on page 44 of the SPC. I may be mistaken, but I believe they are indeed 10-32 NF thread. Might be either 3/16 BSF or 2 BA (which are qui
- /html/triumphs/2005-11/msg00688.html (7,463 bytes)
This search system is powered by
Namazu