- 1. RE: Tool 1, User 0 ("nut plate" gun) (score: 1)
- Author: "Kent Sullivan" <kentsu@corvairkid.com>
- Date: Sun, 3 Feb 2002 08:44:44 -0800
- Thanks to everyone who replied here and privately. The 8/32" setup works so we measured the 6/32" mandrel. It's out of spec (too small diameter) which is likely what is allowing the threads to pull t
- /html/shop-talk/2002-02/msg00023.html (9,384 bytes)
- 2. Tool 1, User 0 ("nut plate" gun) (score: 1)
- Author: "Kent Sullivan" <kentsu@corvairkid.com>
- Date: Sun, 27 Jan 2002 17:03:42 -0800
- After one quarter of play has elapsed, the Tool has outscored the User one to nothing but the User has called for reinforcements... <g> I'm trying to use a borrowed tool. It's never been used (so the
- /html/shop-talk/2002-01/msg00211.html (8,449 bytes)
- 3. RE: Tool 1, User 0 ("nut plate" gun) (score: 1)
- Author: "Randall Young" <ryoung@navcomtech.com>
- Date: Sun, 27 Jan 2002 17:55:06 -0800
- I've used something very similar, except it was just a kit of mandrels and 'Rivet Nuts' to use with an ordinary 'Pop Rivet' tool. Unfortunately (for you) I've never had the problem you describe. It
- /html/shop-talk/2002-01/msg00212.html (9,594 bytes)
- 4. Re: Tool 1, User 0 ("nut plate" gun) (score: 1)
- Author: "Neil Sherry" <neil@sherry02.freeserve.co.uk>
- Date: Mon, 28 Jan 2002 12:15:04 -0000
- There are a number of explanations: 1 As mentioned elsewhere the drive screw on the tool is not the correct one for the inserts 2 The parts a faulty (has anyone installed any of these?). They should
- /html/shop-talk/2002-01/msg00215.html (10,533 bytes)
This search system is powered by
Namazu