Search String: Display: Description: Sort:

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*TR4\s+won\'t\s+go\s*$/: 4 ]

Total 4 documents matching your query.

1. TR4 won't go (score: 1)
Author: Unknown
Date: Sun, 9 Aug 1998 20:30:08 -0700 (PDT)
I fiddled with the battery leads & starter cable and my TR4 cranks a little better. But it still won't fire when I crank it. I'm getting lots of gas- plugs are wet and smell like it. The only clue I
/html/triumphs/1998-08/msg00541.html (6,947 bytes)

2. Re: TR4 won't go (score: 1)
Author: Unknown
Date: Sun, 09 Aug 1998 21:52:59 -0700
I would guess that the low tension lead is the problem. But you can also pull a plug & ground it, then crank the motor over to see if you are getting a spark. By all means, try the other coil, too.
/html/triumphs/1998-08/msg00547.html (8,315 bytes)

3. Re: TR4 won't go (score: 1)
Author: Unknown
Date: Mon, 10 Aug 1998 04:58:20 -0400
Hi Malcolm, I had a similar, if not same problem with my 250 several years ago. Took a lot of fiddling around, but finally found that when I turned the key to start, the power to the coil was turned
/html/triumphs/1998-08/msg00558.html (7,256 bytes)

4. Re: TR4 won't go (score: 1)
Author: Unknown
Date: Mon, 10 Aug 1998 07:49:18 +0000
It just takes a minute to check the coil to distributor spark wire. I had a problem there, had to spread the end a bit to get an adequate fit. Sounds like you have compression and fuel, just have to
/html/triumphs/1998-08/msg00568.html (7,742 bytes)


This search system is powered by Namazu