- 1. TR3B: Pressing Wishbones Onto Trunnions (score: 1)
- Author: Unknown
- Date: Fri, 13 Nov 1998 14:26:57 -0800charset="iso-8859-1"
- Well I've bead blasted and painted (w/ POR-15) all of my suspension components, and now it's time to look towards the re-assembly. I've put new bushings into my lower wishbone arms, and have purchase
- /html/triumphs/1998-11/msg00778.html (6,913 bytes)
- 2. Re: TR3B: Pressing Wishbones Onto Trunnions (score: 1)
- Author: Unknown
- Date: Fri, 13 Nov 1998 18:23:03 EST
- The bushings MUST be reamed after they've been pressed into the lower wishbones. DO NOT FORCE FIT THEM ONTO THE TRUNIONS!!! The workshop manual specifies that the bushes be reamed to 0.6245" to 0.62
- /html/triumphs/1998-11/msg00784.html (7,853 bytes)
- 3. Re: TR3B: Pressing Wishbones Onto Trunnions (score: 1)
- Author: Unknown
- Date: Sat, 14 Nov 1998 00:59:16 -0800
- You may have to ream them out to fit???? Mike Francis
- /html/triumphs/1998-11/msg00805.html (7,246 bytes)
- 4. Re: TR3B: Pressing Wishbones Onto Trunnions (score: 1)
- Author: Unknown
- Date: Sat, 14 Nov 1998 07:21:06 EST
- The springpan should swing freely and in order to accomplish this, the wishbone arms rust rotate freely on the trunnion pins. Did you ream the bushings out? As I remember, after you press the new bu
- /html/triumphs/1998-11/msg00807.html (7,293 bytes)
This search system is powered by
Namazu