Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Removing\s+A\s+Keyless\s+Chuck\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Removing\s+A\s+Keyless\s+Chuck\s*$/: 6 ]

Total 6 documents matching your query.

1. Removing A Keyless Chuck (score: 1): Author: "Bedard, Justin" <justin_bedard@merck.com>; Date: Tue, 06 Jul 1999 13:04:39 -0400; I recently purchased a DeWalt 3/8" drill with keyless chuck. I want to put this 90 degree, 1-to-1 Craftsman adapter on the end of it so that I can drill this one tight spot. The directions that come; /html/shop-talk/1999-07/msg00007.html (7,947 bytes)
2. Re: Removing A Keyless Chuck (score: 1): Author: jniolon@uss.com; Date: Tue, 06 Jul 1999 12:38:11 -0500; not sure about the Dewalt brand, but many drills have a screw which holds the chuck onto the drill motor... open up the chuck completely and look down into the chuck toward the shaft... if you see a; /html/shop-talk/1999-07/msg00008.html (7,205 bytes)
3. Re: Removing A Keyless Chuck (score: 1): Author: Mike Sloane <msloane@att.net>; Date: Tue, 06 Jul 1999 13:35:38 -0400; You are on the right track, Justin, but it takes a sharp blow to jar the chuck loose. And you can hold the drill anywhere. If it were me, I wouldn't bother with the soft hammer - I would give the wre; /html/shop-talk/1999-07/msg00009.html (8,752 bytes)
4. RE: Removing A Keyless Chuck (score: 1): Author: "Bedard, Justin" <justin_bedard@merck.com>; Date: Tue, 06 Jul 1999 15:00:44 -0400; Looking inside the chuck, I do see a Torx screw. But the directions make no mention of removing this screw. Maybe I'll try hammering it a little harder like Mike Sloane suggested and then attempt to; /html/shop-talk/1999-07/msg00013.html (8,004 bytes)
5. RE: Removing A Keyless Chuck (score: 1): Author: jniolon@uss.com; Date: Tue, 06 Jul 1999 14:10:45 -0500; could work , but I've never seen one that had a screw that DIDN'T have to be removed... I just put a keyless chuck on my Makita cordless and it took a couple of GOOD licks with a ball peen hammer to; /html/shop-talk/1999-07/msg00014.html (8,629 bytes)
6. RE: Removing A Keyless Chuck (score: 1): Author: "Bedard, Justin" <justin_bedard@merck.com>; Date: Tue, 06 Jul 1999 16:37:22 -0400; First, thanks to all that replied. it in a clockwise direction to loosen the Torx screw. Next remove the screw (left-hand threads), then stick the allen wrench back into the chuck and give it a good; /html/shop-talk/1999-07/msg00015.html (10,110 bytes)

Current List: 1 - 6
Page: [1]