- 1. Oil Can Misery (score: 1)
- Author: "Dave Munroe" <dave@munroe.ca>
- Date: Sun, 20 May 2001 18:39:04 -0300
- Greetings fellow sufferers; I have 7 pumper oil cans that I park in a large catch-can because they ALL drip and leak after use. Seems the pressure continues to drive the oil out every possible channe
- /html/shop-talk/2001-05/msg00077.html (7,105 bytes)
- 2. RE: Oil Can Misery (score: 1)
- Author: "Gerald Brazil" <gerrybraz@voyager.net>
- Date: Sun, 20 May 2001 20:03:37 -0400
- Dave I can't solve the problem but you may have helped me solve a mystery. I keep my pumper oil cans as well as bottled quarts of oil on an old cafeteria tray on a shelf. Every time I pick up a quart
- /html/shop-talk/2001-05/msg00078.html (7,289 bytes)
- 3. Re: Oil Can Misery (score: 1)
- Author: Randall Young <randallyoung@earthlink.net>
- Date: Sun, 20 May 2001 18:08:21 -0700
- I've never seen a pump-type can that developed pressure against the screw-on top threads. Mine all have a pump body that hangs down inside the can, and pumps directly into the tube that runs through
- /html/shop-talk/2001-05/msg00079.html (7,984 bytes)
- 4. Re: Oil Can Misery (score: 1)
- Author: Douglas Shook <shook@usc.edu>
- Date: Sun, 20 May 2001 18:28:59 -0700
- I had a similar problem with my pump oiler, then I realized that the "can portion" of it actually was two pieces that were pressed together. The oil was wicking or seeping out of the seam. I soldered
- /html/shop-talk/2001-05/msg00080.html (8,038 bytes)
- 5. Re: Oil Can Misery (score: 1)
- Author: "Dave Munroe" <dave@munroe.ca>
- Date: Mon, 21 May 2001 08:41:46 -0300
- Gerald, Doug and Randall; Glad to know I am not the only one with an oily bench! Thanks for the good ideas. Now that you mention it, Doug, my cans are for the most part two piece, and the seams could
- /html/shop-talk/2001-05/msg00081.html (8,311 bytes)
This search system is powered by
Namazu