- 1. Head gasket gunk (score: 1)
- Author: Unknown
- Date: Mon, 15 May 2000 22:19:29 -0400
- Any good ideas of how to get the remains of old head gasket off the block surface? I've started using a very dull putty knife but that leaves some scratches. I tried the straight edge of a piece of
- /html/triumphs/2000-05/msg00796.html (6,830 bytes)
- 2. Re: Head gasket gunk (score: 1)
- Author: Unknown
- Date: Mon, 15 May 2000 21:38:27 -0500
- There is a spray gasket remover that works pretty well. I am fairly sure that I used a Permatex brand. I would think that most auto parts stores would have at least one kind on hand. Usually you spr
- /html/triumphs/2000-05/msg00797.html (7,628 bytes)
- 3. Re: Head gasket gunk (score: 1)
- Author: Unknown
- Date: Mon, 15 May 2000 22:01:51 -0700charset="iso-8859-1"
- Try a single edge razor blade that are used with a holder (sold in hardware stores) that are used to take paint of windows. The shop that did the head on my car recommended the above. Worked great,
- /html/triumphs/2000-05/msg00805.html (7,845 bytes)
- 4. Re: Head gasket gunk (score: 1)
- Author: Unknown
- Date: Tue, 16 May 2000 12:41:50 +0100charset="iso-8859-1"
- Hi Keith I use a window scraper holder with a Stanley Knife blade, just have to get the angle right so it won't dig in, A few small scratches shouldn't cause a problem providing they don't link any t
- /html/triumphs/2000-05/msg00816.html (8,532 bytes)
This search system is powered by
Namazu