- 1. Hammer for wire wheels (score: 1)
- Author: Unknown
- Date: Mon, 28 Oct 1996 15:21:30 -0800
- I just put wire wheels on my TR3 and have been cautioned about using the copper hammer. seems that the ones today are a lot harder than of years past. I have been told that "dead shot" hammer works b
- /html/triumphs/1996-10/msg01126.html (7,211 bytes)
- 2. Re: Hammer for wire wheels (score: 1)
- Author: Unknown
- Date: Tue, 29 Oct 1996 02:00:29 -0600 (CST)
- hi gary, i have no wire wheel experience, but as a midwest USA farmer, we use a dead blow hammer a lot. i think the snap-on one also has oil in it in addition to lead shot. a 24 oz dead blow will eas
- /html/triumphs/1996-10/msg01141.html (8,201 bytes)
- 3. Re: Hammer for wire wheels (score: 1)
- Author: Unknown
- Date: Tue, 29 Oct 1996 06:28:18 -0600 (CST)
- Gary, I highly recommend buying a lead hammer as offered by British Wire Wheel and probably others. This is really the ultimate "dead blow" hammer as the lead deforms around the knockoff when you str
- /html/triumphs/1996-10/msg01146.html (8,252 bytes)
- 4. RE: Hammer for wire wheels (score: 1)
- Author: Unknown
- Date: Tue, 29 Oct 1996 7:17:21 -0600
- I bought a lead shot hamers at Sears for somewhere between those prices. It even came with a pair of safety glasses! Richard Ceraldi 71 GT6 MKIII KF166L ______________________________________________
- /html/triumphs/1996-10/msg01151.html (7,805 bytes)
- 5. Re: Hammer for wire wheels (score: 1)
- Author: Unknown
- Date: Tue, 29 Oct 1996 09:23:02 -0700
- There is a very solid wood tool that is made in England..a high density, seventeen-layer laminated wood wrench, that is "softer" than anything on the market. You can then hit the wrench without marri
- /html/triumphs/1996-10/msg01153.html (7,505 bytes)
- 6. Re: Hammer for wire wheels (score: 1)
- Author: Unknown
- Date: Tue, 29 Oct 1996 09:39:30 -0500
- Gary, 1st - you do not need a massive hammer to do the job correctly, 2nd -TRF, Moss, or Vic Brit all sell the proper hammers. These are lead headed or leather headed. They are quite sufficient and w
- /html/triumphs/1996-10/msg01154.html (13,759 bytes)
- 7. Re: Hammer for wire wheels (score: 1)
- Author: Unknown
- Date: Tue, 29 Oct 1996 20:10:08 -0500
- WHEN I HAD A TRIUMPH WITH WIRE WHEELS I MADE MY OWN HAMMER FOR NEXT TO NOTHING AND IT WORKED GREAT. I WENT DOWN TO THE HARDWARE STORE AND BOUGHT 1, 1" COPPER T, 2, I" COPPER PIPE PLUGS AND A SHORT L
- /html/triumphs/1996-10/msg01186.html (7,279 bytes)
- 8. Re: Hammer for wire wheels (score: 1)
- Author: Unknown
- Date: Wed, 30 Oct 1996 01:35:41 EST
- Many months ago I started a thread about a disk wheel to wire wheel conversion, which slowly evolved into how tight the spinners should be. Art Kelly recently published a researched article about th
- /html/triumphs/1996-10/msg01198.html (8,916 bytes)
This search system is powered by
Namazu