- 1. Crankshaft Oilway Plugs (score: 1)
- Author: "Lew Palmer" <lpalmer@roundaboutmanor.com>
- Date: Mon, 22 Mar 2004 20:30:32 -0600
- OK, Gents. I'm finally getting around to having my PB crankshaft inspected, cleaned, and polished. The question I have is what is the method of removing the crankshaft aluminum oilway plugs. I have d
- /html/mg-mmm/2004-03/msg00057.html (7,608 bytes)
- 2. Re: Crankshaft Oilway Plugs (score: 1)
- Author: Pat Mullen <pmullen@telus.net>
- Date: Mon, 22 Mar 2004 22:06:38 -0800
- The plugs are threaded Right Hand so if you want to try to unscrew them you have to use a Left Hand thread or an Easi-out. Bob Jones wrote the article in the 4- and 6-cyl books from Malcolm Green an
- /html/mg-mmm/2004-03/msg00058.html (9,082 bytes)
- 3. Re: Crankshaft Oilway Plugs (score: 1)
- Author: "J.E.A.Rich" <mmmbob@adelphia.net>
- Date: Tue, 23 Mar 2004 13:42:16 -0700
- It sounds to me that you've drilled out too much of the plug and not left yourself enough to get a hold of. The plugs are 1" OD with a 16 tpi thread and 55: pitch angle. If I'm right and you haven't
- /html/mg-mmm/2004-03/msg00062.html (8,091 bytes)
This search system is powered by
Namazu