Search String: Display: Description: Sort:

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Changing\s+Steering\s+Wheel\s*$/: 11 ]

Total 11 documents matching your query.

1. Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 10:59:24 -0400
Hello all Im replacing my standard wheel with a Moto-Lita I bought... I pulled off the central hub bit, looked inside, and there is a HUGE nut holding the wheel in place, the nut is much bigger than
/html/triumphs/2001-04/msg01476.html (8,407 bytes)

2. RE: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 09:43:40 -0600
If you live in the USA (or Canada) I think you'll find the "huge sprocket" is only about $5 at Home Depot (Husky) , Sears (Craftsman), etc. That's not really that much is it? Remember, it's usually
/html/triumphs/2001-04/msg01477.html (7,888 bytes)

3. Re: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 11:50:14 -0400
Let me see, how can I put this? "No." As Pete says, they're not expensive. I'd suggest getting a whole set of deep pocket sockets that will include the one you need -- you will use them constantly.
/html/triumphs/2001-04/msg01479.html (7,842 bytes)

4. RE: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 12:56:36 -0400
Get the socket. You can buy individual large sockets cheaply at any full service ACE hardware store. I don't know the size off hand but maybe some one else does. Brian Sanborn 62 TR4 CT16260L-O - Gr
/html/triumphs/2001-04/msg01481.html (7,606 bytes)

5. Re: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 15:58:36 -0400 com>
Here is thought no one else has remembered to mention. After you go and buy the socket, Loosen the nut, but DO NOT completely remove it. You'll be yanking on the wheel to get it loose and guess what
/html/triumphs/2001-04/msg01493.html (8,543 bytes)

6. Re: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 14:13:29 -0600
Good advice. But, I've usually had good luck in removing all sorts of steering wheels from many different types of vehicles by loosening the nut, then whacking the underside of one side of wheel rim
/html/triumphs/2001-04/msg01494.html (9,394 bytes)

7. RE: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 13:53:07 -0700
If there's one in your area, check out your local Harbor Freight store. Mine sells single impact sockets for $1 - $2 each. Of course, you won't be using them with an impact tool, but they work just
/html/triumphs/2001-04/msg01496.html (7,771 bytes)

8. Re: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 18:14:40 -0400 (EDT)
Be very careful buying impact sockets for this job. Some I have seen are too thick walled to fit around the nut without hitting the inside perimeter of the opening. Joe be my /// /// triumphs@autox.t
/html/triumphs/2001-04/msg01507.html (8,109 bytes)

9. Re: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 19:08:23 EDT
Noah, for about $10 you can buy a steering wheel puller too. It will save you many hours of grunting. RHouston /// /// triumphs@autox.team.net mailing list /// To unsubscribe send a plain text messag
/html/triumphs/2001-04/msg01521.html (7,658 bytes)

10. Re: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Mon, 30 Apr 2001 18:26:48 -0500
The size of the socket/sprocket is 1-1/8. I bought it at "Tools and More" for $3.50 Dietmar Schlei 1938 Oldsmobile 1963 TR4 and since Saturday: 1977 Spitfire 1500 with lots of unanswered questions f
/html/triumphs/2001-04/msg01525.html (7,986 bytes)

11. Re: Changing Steering Wheel (score: 1)
Author: Unknown
Date: Tue, 01 May 2001 02:14:27 FILETIME=[72BEF600:01C0D1E4]
Noah, Noah, Noah! Bite the bullet. Buy a 1 1/4" half inch drive socket. It'll cost about $8-10. While you're at it buy a short 1/2" drive extension and breaker bar too. Do ya think you'll get the wh
/html/triumphs/2001-04/msg01543.html (9,087 bytes)


This search system is powered by Namazu