- 1. Carb Question?? (score: 1)
- Author: "Overton, Keith A." <Keith.Overton@alcoa.com>
- Date: Mon, 10 May 1999 10:19:13 -0400
- I have a double pumper...(single feed from front) carb with a FoMoCo Tag (on front) I think it is a 650cfm?? not sure? The secondary flys do not open, when I give it throttle, Is there supposed to be
- /html/tigers/1999-05/msg00174.html (7,270 bytes)
- 2. Re: Carb Question?? (score: 1)
- Author: Steve Laifman <laifman@flash.net>
- Date: Mon, 10 May 1999 08:33:18 -0700
- There are, to my limited knowledge, two types of 4 barrels. The mechanically operated secondaries, which are activated by external levers and slotted plates that open them at a set opening of the pr
- /html/tigers/1999-05/msg00178.html (7,944 bytes)
- 3. Re: Carb Question?? (score: 1)
- Author: ritchie@mcn.org (Armand & Lorie Ritchie)
- Date: Mon, 10 May 1999 11:54:27 -0700
- Hay Steve I've got the exact same setup and I can't figure out for the life of me how the secondaries open or if they even work. There's no external linkage or diaphram of any sort on the carb. Mine
- /html/tigers/1999-05/msg00185.html (8,082 bytes)
- 4. Re: Carb Question?? (score: 1)
- Author: Daniel Jones <djones2@mdc.com>
- Date: Mon, 10 May 1999 15:18:31 -0500
- There is also a third secondary style. It's not used on Holleys but it is popular on Carter and Rochester 4 bbls. It consists of a mechanical secondary linkage plus a spring loaded or weighted flappe
- /html/tigers/1999-05/msg00187.html (8,843 bytes)
- 5. RE: Carb Question?? (score: 1)
- Author: "Allan Connell, Jr." <alcon@earthlink.net>
- Date: Mon, 10 May 1999 13:49:57 -0700
- Armand, Steve, et al..... If I am not mistaken, it could very well be a Carter or Rochester too; even with a FoMoCo number. IMHO, OTT; HIDK! Allan Hay Steve I've got the exact same setup and I can't
- /html/tigers/1999-05/msg00188.html (8,524 bytes)
- 6. Re: Carb Question?? (score: 1)
- Author: James Barrett <jamesbrt@mindspring.com>
- Date: Mon, 10 May 1999 18:14:39 -0400
- Keith, My double pumper (dual feed fuel inlets) had an 1/8" diameter rod on the drivers side of the carb that opens the secondaries. Maybe you have a vacumn secondary with parts missing. James Barret
- /html/tigers/1999-05/msg00192.html (7,743 bytes)
This search system is powered by
Namazu