- 1. Blast Cabinet Question: How Tall? (score: 1)
- Author: doug@dougbraun.com
- Date: Tue, 14 Feb 2006 13:51:30 -0500
- I am mostly finished with my project of building a blasting cabinet from TP Tools' parts kit and plans, and I am to the point where I have to cut the legs. Does anybody have any advice on how high t
- /html/shop-talk/2006-02/msg00024.html (7,137 bytes)
- 2. Re: Blast Cabinet Question: How Tall? (score: 1)
- Author: Mike Rambour <mikey@b2systems.com>
- Date: Tue, 14 Feb 2006 14:16:58 -0800
- Its all comfort and where you want it to be. I am 5'8" and the arm hole is a 8" hole with the bottom of it at 40" from the ground. That is approx. 2 1/2" above the grate inside the blasting cabinet.
- /html/shop-talk/2006-02/msg00030.html (8,190 bytes)
- 3. Re: Blast Cabinet Question: How Tall? (score: 1)
- Author: "Eric J Russell" <ejrussell@mebtel.net>
- Date: Tue, 14 Feb 2006 20:12:28 -0500
- When I built my blast cabinet I made the bottom of the arm holes about elbow height. I later added some casters under the unit so now the arm holes are slightly higher than my elbow height. It is qui
- /html/shop-talk/2006-02/msg00033.html (7,419 bytes)
- 4. Re: Blast Cabinet Question: How Tall? (score: 1)
- Author: "Marknsuz" <marknsuz@pacbell.net>
- Date: Tue, 14 Feb 2006 20:05:57 -0800
- Consider leaving the legs too long and trying it at different heights by putting a platform you can move up and down in front of it (a bunch of 2x s sitting on one or more layers of 2x shims). Cut t
- /html/shop-talk/2006-02/msg00035.html (7,678 bytes)
- 5. Re: Blast Cabinet Question: How Tall? (score: 1)
- Author: "ejrussell@mebtel.net" <ejrussell@mebtel.net>
- Date: Wed, 15 Feb 2006 08:42:50 -0500
- Funny story - my Dad told me of a co-worker who always spent more time complaining than working. This guy's latest complaint was that his blast cabinet was too low and it hurt his back. One day, afte
- /html/shop-talk/2006-02/msg00040.html (7,287 bytes)
This search system is powered by
Namazu