Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[oletrucks\]\s+rear\s+axle\s+seals\s+on\s+TF\s+trucks\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[oletrucks\]\s+rear\s+axle\s+seals\s+on\s+TF\s+trucks\s*$/: 5 ]

Total 5 documents matching your query.

1. [oletrucks] rear axle seals on TF trucks (score: 1): Author: Wayne Osborne <wayne@chevytrucks.org>; Date: Mon, 23 Sep 2002 10:00:15 -0400; What can be done if the axles are worn down enough that new seals won't stop the fluid leaks? Any contacts on new axles.. --wayne Wayne Osborne 1956 Chevy Pickup LaGrange Ga. http://www.chevytrucks.o; /html/oletrucks/2002-09/msg00246.html (7,318 bytes)
2. RE: [oletrucks] rear axle seals on TF trucks (score: 1): Author: "Terry Stellman" <STELLMAN@noex.com>; Date: Mon, 23 Sep 2002 09:09:30 -0500; I think they make those little sleeves that you 'slip' over the worn part of the axle similar to the sleeves you put on harmonic balancers. Try NAPA or FLAPS. Terry Stellman 1949 3600 Missouri City,; /html/oletrucks/2002-09/msg00247.html (7,949 bytes)
3. RE: [oletrucks] rear axle seals on TF trucks (score: 1): Author: "Hanlon, Bill (ISS Houston)" <Bill.Hanlon@hp.com>; Date: Mon, 23 Sep 2002 09:28:35 -0500; I have seen very thin sleeves that slide onto axles (and front seal areas of crankshafts) that solve this problem. If someone on the list does not have specific to TF information I would start by che; /html/oletrucks/2002-09/msg00249.html (8,120 bytes)
4. Re: [oletrucks] rear axle seals on TF trucks (score: 1): Author: <safesix@earthlink.net>; Date: Mon, 23 Sep 2002 07:43:01 -0700; I had this problem on my AD GMC. There is often pitting and wear ("witness marks") on the axle surface where the seal rides. I installed stainless steel repair sleeves which cost about $20 per axle a; /html/oletrucks/2002-09/msg00250.html (8,130 bytes)
5. Re: [oletrucks] rear axle seals on TF trucks (score: 1): Author: Bruce Kettunen <bekett@uslink.net>; Date: Mon, 23 Sep 2002 15:52:50 -0500; Go to an industrial bearing house and ask for a speedy sleeve with the same ID as the axle OD. This puts a brand new surface on the gouged face of the axle and allows the seal to ride on fresh metal.; /html/oletrucks/2002-09/msg00254.html (8,059 bytes)

Current List: 1 - 5
Page: [1]