- 1. [Shop-talk] oil pump screen...mesh size? (score: 1)
- Author: "Steve Hammatt Mount Vernon WA USA" <gsteve@hammatt.com>
- Date: Mon, 29 Sep 2008 16:32:25 -0700
- I need to make an oil pump screen for an antique automobile. I'm planning on creating a brass woven wire cloth tube (soldered along the seam) and then soldered to two brass washers, one at each end,
- /html/shop-talk/2008-09/msg00296.html (7,375 bytes)
- 2. Re: [Shop-talk] oil pump screen...mesh size? (score: 1)
- Author: "David Scheidt" <dmscheidt@gmail.com>
- Date: Mon, 29 Sep 2008 21:39:28 -0400
- the ones I'm familiar with are of reasonably tight mesh, but have been larger than a tube, with the mesh held onto some sort of frame to hold their shape. I presume that's because that gives a bigger
- /html/shop-talk/2008-09/msg00299.html (7,857 bytes)
- 3. Re: [Shop-talk] oil pump screen...mesh size? (score: 1)
- Author: "Randall" <tr3driver@ca.rr.com>
- Date: Mon, 29 Sep 2008 22:57:17 -0700
- Never tried to measure the mesh size, but the pickup screen on a TR3 is only a little coarser than window screen. Be sure the wire can't vibrate at the edge of a solder joint. The original TR3 scree
- /html/shop-talk/2008-09/msg00310.html (7,422 bytes)
This search system is powered by
Namazu