- 1. [Healeys] tricarb vacuum pick off (score: 1)
- Author: Steven Kemple <skemple@tidewater.net>
- Date: Thu, 28 Oct 2010 19:56:58 -0400
- I am a fresh subscriber to the list although I have been around Healeys and have viewed the archives for quite some time. The current car is a '62 tricarb that I have had just a few months. While cha
- /html/healeys/2010-10/msg00791.html (7,485 bytes)
- 2. Re: [Healeys] tricarb vacuum pick off (score: 1)
- Author: I Erbs <eyera3@gmail.com>
- Date: Thu, 28 Oct 2010 21:43:46 -0700
- Does not matter which carb you get vaccum from. Any parts store will have vaccum hose I Erbs Sent from my iPod On Oct 28, 2010, at 4:56 PM, Steven Kemple <skemple@tidewater.net> wrote: ______________
- /html/healeys/2010-10/msg00798.html (8,722 bytes)
- 3. Re: [Healeys] tricarb vacuum pick off (score: 1)
- Author: Steven Kemple <skemple@tidewater.net>
- Date: Wed, 3 Nov 2010 15:17:31 -0400
- Thanks for the information. All is back together and test run. It was quite a valuable learning experience having to R and R the full tricarb setup. And no extra parts when done! In the process I unc
- /html/healeys/2010-11/msg00094.html (9,349 bytes)
- 4. Re: [Healeys] tricarb vacuum pick off (score: 1)
- Author: Olin Brimberry <healey@hunterbane.com>
- Date: Wed, 3 Nov 2010 21:19:07 -0400
- So does this mean that there was nothing wrong with your carbs after all? How did the gaskets slip over the port? I thought that this was held in place by the intake studs, no? Olin Brimberry 61 3000
- /html/healeys/2010-11/msg00103.html (11,184 bytes)
- 5. Re: [Healeys] tricarb vacuum pick off (score: 1)
- Author: Steven Kemple <skemple@tidewater.net>
- Date: Thu, 4 Nov 2010 08:18:26 -0400
- The carbs still were in pretty rough shape, but probably not as bad as it appeared. The gaskets that slipped were the ones on the reverse side of the heat shield. The holes in them were very elongate
- /html/healeys/2010-11/msg00110.html (7,876 bytes)
This search system is powered by
Namazu