- 1. [Healeys] Stripped Nut on the Shock Mount (score: 1)
- Author: Michael Hartfield <hartfiel@alumni.princeton.edu>
- Date: Wed, 27 May 2009 10:47:34 -0700
- Of the four bolts holding the shock in place on the left front, I have one that is stripped. I tried a new bolt and it spins. What steps are recommended to replace the threads on the nut side? Thanks
- /html/healeys/2009-05/msg00677.html (7,324 bytes)
- 2. Re: [Healeys] Stripped Nut on the Shock Mount (score: 1)
- Author: Bob Spidell <bspidell@comcast.net>
- Date: Wed, 27 May 2009 18:23:26 +0000 (UTC)
- I've used thread inserts successfully (helicoil, etc.). It's a standard 3/8x24 ("fine") thread--which might be a little less common than "coarse"--but my favorite local parts house was able to order
- /html/healeys/2009-05/msg00679.html (7,905 bytes)
- 3. Re: [Healeys] Stripped Nut on the Shock Mount (score: 1)
- Author: "Steve Gerow" <steveg@abrazosdata.com>
- Date: Wed, 27 May 2009 12:48:37 -0700
- There's a lot of discussion in the archives on this. From your description, am assuming captive nut is still attached but threads are stripped. If nut is loose skip directly to 3) or 4) Short versio
- /html/healeys/2009-05/msg00682.html (8,362 bytes)
This search system is powered by
Namazu